BETA-CAE Systems 23.0.0 (x64)

امتیاز موضوع:
  • 0 رأی - میانگین امتیازات: 0
  • 1
  • 2
  • 3
  • 4
  • 5
#1
[تصویر:  eb752bdabd92d5751ed4989da5040311.jpeg]

BETA-CAE Systems 23.0.0 | 2.3 Gb

Product:BETA CAE Systems
Version:23.0.0
Supported Architectures:x64
Website Home Page :www.beta-cae.com
Languages Supported:english
System Requirements:Windows *
Size:2.3 Gb

BETA CAE Systems is thrilled to announce the release of the major version 23.0.0 of its product line. The new version includes a vast range of upgrades and performance improvements for existing workflows, as well as new features to unlock further potential for engineering simulation in design and analysis.

[تصویر:  93f2cb4e6c99998e1255a7c1ef5561a7.jpeg]

Aiming at minimizing design turnaround time and reducing manual set-up for numerous workflows, the new series effectively overcomes the challenges of design performance, while meeting the high-quality requirements of multi-disciplinary engineering teams.

- The unification of TOPO and MESH functionality in ANSA.
- The seamless integration of Machine Learning in selected mesh functions, such as feature detection and middle mesh generation.
- The accelerated performance of batch algorithms on CFD mixed type meshing.
- The potential of newly introduced domains, such as Electromagnetics and Electrochemistry in ANSA and META.
- The enhanced graphics performance in META, coupled with low GPU memory consumption.
- The extended optimization capabilities in EPILYSIS.
- The integration of SPDRM in various actions in KOMVOS, delivering an extra boost in process execution.


KOMVOS 23.0.0 highlights

ANSA 23.0.0 highlights

EPILYSIS v23.0.0 highlights

META v23.0.0 highlights


License Manager compatibility

Starting from v23.0.0 and onwards, the BETA LM v7.0 is a prerequisite for running any BETA Software Suite Product.

Solutions for every stage of product development with ANSA

The unification of TOPO and MESH functionality provides extraordinary boost to the average user as geometry and mesh are completely manipulated from one toolset. This has been supplemented by the redesign of common functions, with modern neat look-and-feel, common GUI, unified functions, as well as by the addition of new dedicated toolsets for the designer or the analyst.

In the mesh area in particular, significant enhancements have taken place for both structural and CFD disciplines.

Such enhancements for the structural discipline includes, the enhanced solid mesh algorithm that provides effortless generation of high-quality mesh, in a redesigned GUI and with direct control of the simplification level. Automated HexaBlock generation for tubular shapes is now possible, while embedded clips FE representations are automatically realized, connected, and stored in DM, through Feature Manager and Casting.

For CFD, an impressive acceleration of 50% has taken place for batch meshing, particularly in mixed type meshing. Further improvements have taken place in anisotropic meshing of leading edges, whereas a special treatment for Layers' Thin Area provides meshed thin regions of volumes using prism and hexa elements.

A plethora of new tools and features have been integrated in the Crash & Safety area as well. The Human Body Models articulation has been enriched with the extended support of GHBMC, THUMS, and VIVA+ families. Also, the new Bicycle Configurator tool targets to the configuration of the main dimensions and the pedals' position of a bicycle model, while setting up the HBM cyclist loadcase. A new direct functionality has also been added in the Seatbelt tool, to locally modify the shape of the belt. All these come along with the new protocols that are now supported by the Pedestrian Tool, such as GBT 24550, JNCAP 2019, C-IASI.

Placing the focus on Durability, pretension and contacts are automatically generated on beams in Connection Manager through BOLT ON SOLID representation, followed by the definition of appropriate steps and loading conditions for Abaqus, Ansys, Nastran NX and Pam-Crash. In a similar manner, a stepwise assistant for the automatic generation of all possible pretensions has been added for Marc solver, including the definition of the respective keywords and the functionality to generate the appropriate contacts around bolts.

Interactive processes are gaining ground in Morphing, aiming in easy, patch-style reinforcement generation, efficient morphing with pinned ends and effortless member creation with multiple Design options.

Apart from all the major features and groundbreaking implementations, we always keep an eye on constantly boosting user performance. Towards that direction, an acceleration of up to x7 in Graphics performance has resulted in up to 50% acceleration of Model Navigation on models with geometry.

In v23.0.0, the user performance boost is evident even when working on plain, daily tasks and processes. For example, in the Database Browser of v23.0.0 the categories have been restructured, connection drawing and selection/deselection methods have been enhanced, and the direct job submission enables the effortless monitoring and error handling for Abaqus, Pam-Crash and LS-DYNA.
Industry-leading solutions through EPILYSIS

The extended support of calculations for Participation Factors, the introduction of new algorithms for Dynamic Modal Solutions and Superelements and for Fluid-Structure Interaction, as well as the output of states pace equations in Functional Mock-up Unit format for use in 3rd party simulation software, are only some of the new capabilities to be revealed in EPILYSIS v23.0.0.

Enhanced user experience in META

Always taking into consideration users' special needs and demands, v23.0.0 introduces new palette styles, providing clearer results visualization including colorblind compatible ones. These come to supplement the redesign of curve functions, as well as the fully customizable 3D window title and many other handy features that upgrade user experience in the new version.

As for the performance boost in post-processing, the reading of Pam-Crash ERF files has been significantly speeded-up and up to x10 performance improvement has been remarked in Part/Group distances and separation Descriptions.

Furthermore, expanding post-processing capabilities to electro-related areas, such as electronics, electromagnetics and electrochemistry, and extending META support to more solver and result files, such as ADVENTURECluster, broaden the analysis fields spectrum even more.

In the NVH field, Modal Displacements as Input in Modal Response tool are available in both transient and frequency response analysis, enabling also acoustic response calculations. Thanks to the new toolbar for Flex Body Analysis, the Flex Body motion derived from MBS results is now animated including stress contour Descriptions. Modal displacements and strain energy participations can also be Descriptionted.

Closing the discipline-related highlights with CFD, shock waves can be detected and visualized through Schlieren Field result. Volume of droplets formed by SPH particles or isofunctions can be identified and further calculated and the number of Flow Paths can be defined in S and T direction.

Moreover, constantly providing access to 3rd party data management servers, such as ASAM ODS, geometry and 3D results are now successfully loaded in META.

Innovative patterns and workflows through KOMVOS

Apart from the significant uplift of Machine Learning algorithms that, not only can be accessed through python script interface, but can also be performed through an SPDRM server, utilizing remote powerful machines for faster training, SPDRM processes have now been smoothly integrated in KOMVOS, providing a significant boost process-wise.

Moreover, with the integration of KOMVOS with Visual Studio Code, any user can now write and test Python code for KOMVOS in a powerful IDE, whereas the addition of relationship-based and mixed-type searches, take user experience and performance to another level.

[تصویر:  990fffdafc508427a888313adbe209f8.jpeg]

[تصویر:  df1822b7fee0b8a3bf5a8ec16b3edbd2.jpeg]

[تصویر:  3fbf9bef95b23e80d2649f687dd83100.jpeg]

The engineers at BETA CAE Systemssee simulation as a tool that can be used to predict the future. The Swiss company seeks to offer tools for every stage of the product development process, and its vision is to stop trade-off thinking. Instead of working under the constraints of quality, time and cost, the company hopes that customers using its tools early enough in the process will be able to win in all three areas.

Working through a full development cycle can require different tools for different phases.ANSAis the preprocessor tool that accepts CATIA V4, CATIA V5, NX, Pro/ENGINEER and Jupiter Tessellation (JT) files. TheEPILYSISsolver performs structured analysis in both linear and nonlinear paths. TheMETApost-processor offers several options for framing and presenting a study, with a focus on graphics and visualization.

The new 23.0.0 of the BETA CAE systems software suite comes with numerous new tools and features, designed to facilitate and expand your simulation processes.

BETA CAE Systems Solutions for Biomechanics

Watch this video and find out how BETA CAE Systems software products will help you streamline your Biomechanics simulations.
BETA is a simulation solutions provider,dedicated to the development of state of the art software systems. For almost 30 years, BETA has been developing tools and delivering services for the front runners of numerous sectors by listening to their needs and taking up even the most demanding challenges.

Product:BETA CAE Systems
Version:23.0.0
Supported Architectures:x64
Website Home Page :www.beta-cae.com
Languages Supported:english
System Requirements:Windows *
Size:2.3 Gb


[تصویر:  732be8534cb4fd50874f0059d33f5c68.jpeg]
Compatibility and Supported Platforms

ANSA files saved by all the first and second point releases of a major version are compatible to each other. New major versions can read files saved by previous ones but not vice versa.

META Project files saved from version 23.0.0 are compatible and can be opened by META version 16.0.0 or later.

Support for Windows 7 has been discontinued.

Support for Red Hat 6, and other Red Hat 6 compatible Linux distributions has been discontinued.

Support for Mac OS has been discontinued.

Support for 32-bit platforms has been discontinued for all operating systems.



Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
کد:
https://www.uploadcloud.pro/806910g3ghtf/4qce1.part1.rar.html
https://www.uploadcloud.pro/onddpzlv9s4h/4qce1.part2.rar.html

Rapidgator
https://rapidgator.net/file/3a1d1e9a76777db5fb1c14f87a8802b3/4qce1.part1.rar.html
https://rapidgator.net/file/fa965f4efda1043c10d91d5b2f06b10a/4qce1.part2.rar.html

NitroFlare
https://nitro.download/view/0276C33167FEF88/4qce1.part1.rar
https://nitro.download/view/E2278B39D324445/4qce1.part2.rar

Uploadgig
https://uploadgig.com/file/download/63d2486e8f824Ea6/4qce1.part1.rar
https://uploadgig.com/file/download/3eaFDc9f2Dd16974/4qce1.part2.rar
پاسخ
#1
[تصویر:  eb752bdabd92d5751ed4989da5040311.jpeg]

BETA-CAE Systems 23.0.0 | 2.3 Gb

Product:BETA CAE Systems
Version:23.0.0
Supported Architectures:x64
Website Home Page :www.beta-cae.com
Languages Supported:english
System Requirements:Windows *
Size:2.3 Gb

BETA CAE Systems is thrilled to announce the release of the major version 23.0.0 of its product line. The new version includes a vast range of upgrades and performance improvements for existing workflows, as well as new features to unlock further potential for engineering simulation in design and analysis.

[تصویر:  93f2cb4e6c99998e1255a7c1ef5561a7.jpeg]

Aiming at minimizing design turnaround time and reducing manual set-up for numerous workflows, the new series effectively overcomes the challenges of design performance, while meeting the high-quality requirements of multi-disciplinary engineering teams.

- The unification of TOPO and MESH functionality in ANSA.
- The seamless integration of Machine Learning in selected mesh functions, such as feature detection and middle mesh generation.
- The accelerated performance of batch algorithms on CFD mixed type meshing.
- The potential of newly introduced domains, such as Electromagnetics and Electrochemistry in ANSA and META.
- The enhanced graphics performance in META, coupled with low GPU memory consumption.
- The extended optimization capabilities in EPILYSIS.
- The integration of SPDRM in various actions in KOMVOS, delivering an extra boost in process execution.


KOMVOS 23.0.0 highlights

ANSA 23.0.0 highlights

EPILYSIS v23.0.0 highlights

META v23.0.0 highlights


License Manager compatibility

Starting from v23.0.0 and onwards, the BETA LM v7.0 is a prerequisite for running any BETA Software Suite Product.

Solutions for every stage of product development with ANSA

The unification of TOPO and MESH functionality provides extraordinary boost to the average user as geometry and mesh are completely manipulated from one toolset. This has been supplemented by the redesign of common functions, with modern neat look-and-feel, common GUI, unified functions, as well as by the addition of new dedicated toolsets for the designer or the analyst.

In the mesh area in particular, significant enhancements have taken place for both structural and CFD disciplines.

Such enhancements for the structural discipline includes, the enhanced solid mesh algorithm that provides effortless generation of high-quality mesh, in a redesigned GUI and with direct control of the simplification level. Automated HexaBlock generation for tubular shapes is now possible, while embedded clips FE representations are automatically realized, connected, and stored in DM, through Feature Manager and Casting.

For CFD, an impressive acceleration of 50% has taken place for batch meshing, particularly in mixed type meshing. Further improvements have taken place in anisotropic meshing of leading edges, whereas a special treatment for Layers' Thin Area provides meshed thin regions of volumes using prism and hexa elements.

A plethora of new tools and features have been integrated in the Crash & Safety area as well. The Human Body Models articulation has been enriched with the extended support of GHBMC, THUMS, and VIVA+ families. Also, the new Bicycle Configurator tool targets to the configuration of the main dimensions and the pedals' position of a bicycle model, while setting up the HBM cyclist loadcase. A new direct functionality has also been added in the Seatbelt tool, to locally modify the shape of the belt. All these come along with the new protocols that are now supported by the Pedestrian Tool, such as GBT 24550, JNCAP 2019, C-IASI.

Placing the focus on Durability, pretension and contacts are automatically generated on beams in Connection Manager through BOLT ON SOLID representation, followed by the definition of appropriate steps and loading conditions for Abaqus, Ansys, Nastran NX and Pam-Crash. In a similar manner, a stepwise assistant for the automatic generation of all possible pretensions has been added for Marc solver, including the definition of the respective keywords and the functionality to generate the appropriate contacts around bolts.

Interactive processes are gaining ground in Morphing, aiming in easy, patch-style reinforcement generation, efficient morphing with pinned ends and effortless member creation with multiple Design options.

Apart from all the major features and groundbreaking implementations, we always keep an eye on constantly boosting user performance. Towards that direction, an acceleration of up to x7 in Graphics performance has resulted in up to 50% acceleration of Model Navigation on models with geometry.

In v23.0.0, the user performance boost is evident even when working on plain, daily tasks and processes. For example, in the Database Browser of v23.0.0 the categories have been restructured, connection drawing and selection/deselection methods have been enhanced, and the direct job submission enables the effortless monitoring and error handling for Abaqus, Pam-Crash and LS-DYNA.
Industry-leading solutions through EPILYSIS

The extended support of calculations for Participation Factors, the introduction of new algorithms for Dynamic Modal Solutions and Superelements and for Fluid-Structure Interaction, as well as the output of states pace equations in Functional Mock-up Unit format for use in 3rd party simulation software, are only some of the new capabilities to be revealed in EPILYSIS v23.0.0.

Enhanced user experience in META

Always taking into consideration users' special needs and demands, v23.0.0 introduces new palette styles, providing clearer results visualization including colorblind compatible ones. These come to supplement the redesign of curve functions, as well as the fully customizable 3D window title and many other handy features that upgrade user experience in the new version.

As for the performance boost in post-processing, the reading of Pam-Crash ERF files has been significantly speeded-up and up to x10 performance improvement has been remarked in Part/Group distances and separation Descriptions.

Furthermore, expanding post-processing capabilities to electro-related areas, such as electronics, electromagnetics and electrochemistry, and extending META support to more solver and result files, such as ADVENTURECluster, broaden the analysis fields spectrum even more.

In the NVH field, Modal Displacements as Input in Modal Response tool are available in both transient and frequency response analysis, enabling also acoustic response calculations. Thanks to the new toolbar for Flex Body Analysis, the Flex Body motion derived from MBS results is now animated including stress contour Descriptions. Modal displacements and strain energy participations can also be Descriptionted.

Closing the discipline-related highlights with CFD, shock waves can be detected and visualized through Schlieren Field result. Volume of droplets formed by SPH particles or isofunctions can be identified and further calculated and the number of Flow Paths can be defined in S and T direction.

Moreover, constantly providing access to 3rd party data management servers, such as ASAM ODS, geometry and 3D results are now successfully loaded in META.

Innovative patterns and workflows through KOMVOS

Apart from the significant uplift of Machine Learning algorithms that, not only can be accessed through python script interface, but can also be performed through an SPDRM server, utilizing remote powerful machines for faster training, SPDRM processes have now been smoothly integrated in KOMVOS, providing a significant boost process-wise.

Moreover, with the integration of KOMVOS with Visual Studio Code, any user can now write and test Python code for KOMVOS in a powerful IDE, whereas the addition of relationship-based and mixed-type searches, take user experience and performance to another level.

[تصویر:  990fffdafc508427a888313adbe209f8.jpeg]

[تصویر:  df1822b7fee0b8a3bf5a8ec16b3edbd2.jpeg]

[تصویر:  3fbf9bef95b23e80d2649f687dd83100.jpeg]

The engineers at BETA CAE Systemssee simulation as a tool that can be used to predict the future. The Swiss company seeks to offer tools for every stage of the product development process, and its vision is to stop trade-off thinking. Instead of working under the constraints of quality, time and cost, the company hopes that customers using its tools early enough in the process will be able to win in all three areas.

Working through a full development cycle can require different tools for different phases.ANSAis the preprocessor tool that accepts CATIA V4, CATIA V5, NX, Pro/ENGINEER and Jupiter Tessellation (JT) files. TheEPILYSISsolver performs structured analysis in both linear and nonlinear paths. TheMETApost-processor offers several options for framing and presenting a study, with a focus on graphics and visualization.

The new 23.0.0 of the BETA CAE systems software suite comes with numerous new tools and features, designed to facilitate and expand your simulation processes.

BETA CAE Systems Solutions for Biomechanics

Watch this video and find out how BETA CAE Systems software products will help you streamline your Biomechanics simulations.
BETA is a simulation solutions provider,dedicated to the development of state of the art software systems. For almost 30 years, BETA has been developing tools and delivering services for the front runners of numerous sectors by listening to their needs and taking up even the most demanding challenges.

Product:BETA CAE Systems
Version:23.0.0
Supported Architectures:x64
Website Home Page :www.beta-cae.com
Languages Supported:english
System Requirements:Windows *
Size:2.3 Gb


[تصویر:  732be8534cb4fd50874f0059d33f5c68.jpeg]
Compatibility and Supported Platforms

ANSA files saved by all the first and second point releases of a major version are compatible to each other. New major versions can read files saved by previous ones but not vice versa.

META Project files saved from version 23.0.0 are compatible and can be opened by META version 16.0.0 or later.

Support for Windows 7 has been discontinued.

Support for Red Hat 6, and other Red Hat 6 compatible Linux distributions has been discontinued.

Support for Mac OS has been discontinued.

Support for 32-bit platforms has been discontinued for all operating systems.



Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
کد:
https://www.uploadcloud.pro/806910g3ghtf/4qce1.part1.rar.html
https://www.uploadcloud.pro/onddpzlv9s4h/4qce1.part2.rar.html

Rapidgator
https://rapidgator.net/file/3a1d1e9a76777db5fb1c14f87a8802b3/4qce1.part1.rar.html
https://rapidgator.net/file/fa965f4efda1043c10d91d5b2f06b10a/4qce1.part2.rar.html

NitroFlare
https://nitro.download/view/0276C33167FEF88/4qce1.part1.rar
https://nitro.download/view/E2278B39D324445/4qce1.part2.rar

Uploadgig
https://uploadgig.com/file/download/63d2486e8f824Ea6/4qce1.part1.rar
https://uploadgig.com/file/download/3eaFDc9f2Dd16974/4qce1.part2.rar
پاسخ


پرش به انجمن:


کاربرانِ درحال بازدید از این موضوع: 1 مهمان