Altair Inspire 2022.0.2 Build 13007 (x64)

امتیاز موضوع:
  • 0 رأی - میانگین امتیازات: 0
  • 1
  • 2
  • 3
  • 4
  • 5
#1
[تصویر:  2f6367052bf183dd0983b63e97f19ee8.jpeg]
Altair Inspire 2022.0.2 | 3.7 Gb
Product:Altair Inspire
Version:2022.0.0 Build 13007
Supported Architectures:x64
Website Home Page :www.altair.com
Languages Supported:english
System Requirements:Windows *
Size:3.7 Gb

The Altair Inspire products development team is pleased to announce the availability of Inspire 2022.0.2 is the industry's most powerful and easy-to-use Generative Design/Topology Optimization and rapid simulation solution for design engineers.

New Features and Enhancements 2022.0.2
- For PolyMesh tools, the Remove Island API is now supported in batch mode. You can find small, disconnected regions of a meshed part and delete them in batch mode. N-27588
- Fixed an issue where stamping and extrusion draw directions were not created. N-27790
- Temperature load information is now allowed in the model dump. N-26286
- For the Fit PolyNURBS tool, a check box to enable/disable symmetry plane was added. N-27614
- Auto Find has been turned off by default. N-27623
- Fixed an issue where Shift + box selection sometimes didn't deselect a PolyNURBS. N-26033
- Fixed an issue where a failed Pattern operation wasn't indicated graphically. N-26082
- Fixed an issue where, after creating a sketch, dragging the mouse didn't snap the sketch entity to the grid. N-27376
- Fixed a failure to combine the parent part using the Pattern tool's Combine option. N-27660
- Fixed a crash when using the Sculpt tool in the German user interface. N-27686
- Fixed the % yield calculation from SimSolid results. N-27689
- Fixed an issue where the desired optimization structure was not being captured when using the PolyNURBS Fit tool. N27730
- Fixed a construction history issue when entering and exiting Sketch mode. N-27797
- Fixed an issue where Boolean input wasn't being processed when using the Extrude tool. N-27836
- Fixed an issue where obsolete messages were not cleared from the Setup Warnings. M-4169
- Fixed an issue where there was no F1 help link for the Proximity ribbon icon. M-4238
- Fixed an issue where the FE solve would complete but there were no results if Analyze Part was performed on a part that contained no valid motion loads. Now, if there are no loads present on a part, and Analyze Part is requested, a warning message will appear, indicating there are no valid loads to send to the analysis. M-4157
- Fixed an issue where an error occurred if a coil spring was defined by selecting a concentrated mass as the first part selection. M-4289
- Fixed an issue where the tooltip for Proximity measure was not correctly translated in some languages. M-4226
- Enhanced tooltips have now been added for all items under the Motion Run Settings dialog. M-4096
- Fixed an issue where a thermomechanical analysis would fail if run immediately after a calibration analysis. NP-1600
- Fixed a crash with Undo when using variables N-27921
- Fixed an issue that allowed you to select faces from different parts when using the Pattern tool N-27996
- Fixed an issue that imported thin solid parts in CATPart files as nonmanifold geometry N-27967
- Renamed "Radius" to "Diameter" in the Pipe tool N-28000
[تصویر:  882b0a9f7fef318931d7bb399aa476bc.jpeg]
Inspireis an intuitive and powerful family of software products that enables simulation-driven design throughout the entire product development lifecycle, from concept to reality.
When used early in the design process, the Inspire technology empowers the creation of designs that are focused on both performance and manufacturability and empowers its users to explore, develop, and manufacture high-performance products in a single intuitive development environment.
Altair Inspire Overview
Altairis a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.


Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
کد:
https://hot4share.com/xz1mgq8uhwbj/1zdee.rar.html
Rapidgator
https://rapidgator.net/file/fe44d0e8b63a111c73ff3afb2fea3f0d/1zdee.rar.html
NitroFlare
https://nitro.download/view/3EA5951E8249B63/1zdee.rar
Uploadgig
https://uploadgig.com/file/download/a6a4b251b6eaA462/1zdee.rar
پاسخ
#1
[تصویر:  2f6367052bf183dd0983b63e97f19ee8.jpeg]
Altair Inspire 2022.0.2 | 3.7 Gb
Product:Altair Inspire
Version:2022.0.0 Build 13007
Supported Architectures:x64
Website Home Page :www.altair.com
Languages Supported:english
System Requirements:Windows *
Size:3.7 Gb

The Altair Inspire products development team is pleased to announce the availability of Inspire 2022.0.2 is the industry's most powerful and easy-to-use Generative Design/Topology Optimization and rapid simulation solution for design engineers.

New Features and Enhancements 2022.0.2
- For PolyMesh tools, the Remove Island API is now supported in batch mode. You can find small, disconnected regions of a meshed part and delete them in batch mode. N-27588
- Fixed an issue where stamping and extrusion draw directions were not created. N-27790
- Temperature load information is now allowed in the model dump. N-26286
- For the Fit PolyNURBS tool, a check box to enable/disable symmetry plane was added. N-27614
- Auto Find has been turned off by default. N-27623
- Fixed an issue where Shift + box selection sometimes didn't deselect a PolyNURBS. N-26033
- Fixed an issue where a failed Pattern operation wasn't indicated graphically. N-26082
- Fixed an issue where, after creating a sketch, dragging the mouse didn't snap the sketch entity to the grid. N-27376
- Fixed a failure to combine the parent part using the Pattern tool's Combine option. N-27660
- Fixed a crash when using the Sculpt tool in the German user interface. N-27686
- Fixed the % yield calculation from SimSolid results. N-27689
- Fixed an issue where the desired optimization structure was not being captured when using the PolyNURBS Fit tool. N27730
- Fixed a construction history issue when entering and exiting Sketch mode. N-27797
- Fixed an issue where Boolean input wasn't being processed when using the Extrude tool. N-27836
- Fixed an issue where obsolete messages were not cleared from the Setup Warnings. M-4169
- Fixed an issue where there was no F1 help link for the Proximity ribbon icon. M-4238
- Fixed an issue where the FE solve would complete but there were no results if Analyze Part was performed on a part that contained no valid motion loads. Now, if there are no loads present on a part, and Analyze Part is requested, a warning message will appear, indicating there are no valid loads to send to the analysis. M-4157
- Fixed an issue where an error occurred if a coil spring was defined by selecting a concentrated mass as the first part selection. M-4289
- Fixed an issue where the tooltip for Proximity measure was not correctly translated in some languages. M-4226
- Enhanced tooltips have now been added for all items under the Motion Run Settings dialog. M-4096
- Fixed an issue where a thermomechanical analysis would fail if run immediately after a calibration analysis. NP-1600
- Fixed a crash with Undo when using variables N-27921
- Fixed an issue that allowed you to select faces from different parts when using the Pattern tool N-27996
- Fixed an issue that imported thin solid parts in CATPart files as nonmanifold geometry N-27967
- Renamed "Radius" to "Diameter" in the Pipe tool N-28000
[تصویر:  882b0a9f7fef318931d7bb399aa476bc.jpeg]
Inspireis an intuitive and powerful family of software products that enables simulation-driven design throughout the entire product development lifecycle, from concept to reality.
When used early in the design process, the Inspire technology empowers the creation of designs that are focused on both performance and manufacturability and empowers its users to explore, develop, and manufacture high-performance products in a single intuitive development environment.
Altair Inspire Overview
Altairis a global technology company that provides software and cloud solutions in the areas of product development, high performance computing (HPC) and data analytics. Altair enables organizations across broad industry segments to compete more effectively in a connected world while creating a more sustainable future.


Recommend Download Link Hight Speed | Please Say Thanks Keep Topic Live
کد:
https://hot4share.com/xz1mgq8uhwbj/1zdee.rar.html
Rapidgator
https://rapidgator.net/file/fe44d0e8b63a111c73ff3afb2fea3f0d/1zdee.rar.html
NitroFlare
https://nitro.download/view/3EA5951E8249B63/1zdee.rar
Uploadgig
https://uploadgig.com/file/download/a6a4b251b6eaA462/1zdee.rar
پاسخ


پرش به انجمن:


کاربرانِ درحال بازدید از این موضوع: 1 مهمان